Fan

Detil Produk :

Medium Pressure Centrifugal Fan
MEDIUM PRESSURE AT MEDIUM AIR VOLUME
EASTFORCE Centrifugal Fan type S suitable for air separation by blowing or suctions system. Well suited for all type or ventilation plants and where the air has a relatively high dust.
APPLICATION
Type S Fan are widely applicable for palm kernel recovery plant for material separation as well as pneumatic transport.
DESIGN
The S Fan has 6 standard sizes with impeller diameter from 500mm to 1000mm. All sizes can be furnished on order with 16 types of discharge position either clockwise or anti clockwise. It has "S" shaped backward curve impeller blade, welded construction and designed for relatively high speed.

All sizes can be supplied for direct coupling to motor shaft of for V belt drive using heavy duty Plummer block bearings. Finished with 2 coats of anti rust-primer and 1 coat of good quality paints. The rotating parts are statically and dynamically balanced ensuring vibrationless operation. Standard Fan shall have Fan Inlet Flange.
OPTIONS
Anti Vibration Mountings, Special Design for hot air Fan Outlet Multivane Damper 

Detil Produk :

Low Pressure Centrifugal Fan
LOW PRESSURE AT HIGH AIR VOLUME
EASTFORCE Centrifugal Fan Type L suitable for commercial ventilation and air conditioning. The fans have been designed with high efficiency and universal installation.
APPLICATION
Type L Fan are widely applicable for palm kernel recovery plant for kernel & nut drying silos as well as aeration fan for kernel bulking silos.
DESIGN
The L Fan has 7 standard sizes with impeller diameter from 315mm to 900mm. All sizes can be furnished on order with the 16 type of discharge position either clockwise or anti clockwise. It has backward curved impeller blade, welded construction and designed for relatively high speed. All sizes can be supplied for direct coupling to motor shaft of for V belt drive using heavy duty Plummer block bearings. Finishes with 2 coats of  anti rust-primer and 1 coat of good quality paints. The rotating parts are statically and dynamically balanced ensuring vibrationless operation. Standard Fan shall have Fan Inlet Flange.
OPTION
Anti Vibration Mountings, Special Design for hot air Fan Outlet Multivane Damper.

Detil Produk :

High Pressure Centrifugal Fan
HIGH PRESSURE, SMALL AIR VOLUME BLOWER
EASTFORCE Centrifugal Fan type BC suitable for pressure up to 30” wg. The Fan has an overall good efficiency and volume-pressure characteristic with stable performance. Built in all-welded and heavy duty construction..
APPLICATION
Type BC Fan are widely applicable for industrial plants, e.g fans for boiler, oil and gas burners, Pneumatic transport in palm oil mil and other field which requiring high pressure.
DESIGN
All sizes can be supplied for direct coupling to motor shaft or for V belt drive using heavy duty Plummer block bearings. In standard design the Fan is delivered in all welded scroll casing and long backward curved impeller made of mild steel plate. Finished with 2 coats of anti rust-primer and 1 coat of good quality paints. The rotating parts are statically and dynamically balanced ensuring steady, Vibrationless operation. Standard Fan shall complete with inlet netting.
OPTIONS
Anti Vibration Mountings, Special Design for hot air or smoke, Heat Resistant paint.